MMS 305/A 3.500 Acoustic Surround Power
Instructions for use
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’ uso
Manualdel Usuario
Installationsanleitung
Brugsanrisning
Käyttöohje
Zalecenia dla uýytkownika
Kullaným Kýlavuzu
Pykoboäctbo ïo ýkcïëyaöèè
Instrukcja obstugi
Bruksanvising
Explanation
Explanation
Installation
3
Important notes for users in the U.K.
Norge
Mains plug
Typeskilt finnes på apparatens
underside.
This apparatus is fitted with an
approved 13 Amp plug.
To change a fuse in this type of plug
proceed as follows:
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
1
2
Remove fuse cover and fuse.
Fix new fuse which should be a
BS1362 5 Amp, A.S.T.A. or BSI
approved type.
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
3
Refit the fuse cover.
If the fitted plug is not suitable for your
socket outlets, it should be cut off and
an appropriate plug fitted in its place. If
the mains plug contains a fuse, this
should have a value of 5 Amp. If a plug
without a fuse is used, the fuse at the
distribution board should not be greater
than 5 Amp.
Deutschland
Hiermit wird bescheinigt, daß dieses
Gerät in Übereinstimmung mit den
Bestimmungen der
Amtsblattverfügung 1046/1984
funkentstört ist.
Note: The severed plug must be
disposed of to avoid a possible shock
hazard should it be inserted into a 13
Amp socket elsewhere.
Der Deutschen Bundespost wurde
das Inverkehrbringen dieses Gerätes
angezeigt und die Berechtigung zur
Überprüfung der Serie auf
Einhaltung der Bestimmungen
eingeräumt.
How to connect a plug
The wires in the mains lead are
coloured with the following code:
blue = neutral (N), brown = live (L).
As these colours may not correspond
with the colour markings identifying the
terminals in your plug, proceed as
follows:
•
Connect the blue wire to the
terminal marked N or coloured
black.
•
•
Connect the brown wire to the
terminal marked L or coloured red.
Do not connect either wire to the
earth terminal in the plug, marked
E (or ) or coloured green (or green
and yellow).
Before replacing the plug cover, make
certain that the cord grip is clamped
over the sheath of the lead - not simply
over the two wires.
Copyright in the U.K.
Recording and playback of material
may require consent. See Copyright
Act 1956 and The Performer's
Protection Acts 1958 to 1972.
4
English ...........6
French ..........10
German ........14
Italian ...........18
Spanish ........22
Dutch ............26
Swedish .......30
Finish ...........34
Polish ...........38
Chinese ........42
Turkish .........46
Russian ........50
Norwegian ....54
Danish ..........58
5
Description
Philips Advanced Technologies
Ultra-thin design, powerful surround audio!
The A 3.500 Acoustic Surround Power / MMS
305 is the result of the ultimate union of Philips
acoustical core competencies. We created a
multimedia multi-channel speaker system that
features four ultra-thin soft flat panel speakers, a
variety of mounting options and an explosive
wOOx™ subwoofer. The set is the perfect choice
for a space-saving hifi audio solution.
wOOx™
Anchored by a 40 watt subwoofer, the A 3.500
Acoustic Surround Power / MMS 305 system
employs Philips’ patented wOOx™ Bass Driver
technology to generate superior bass from a
deceptively small enclosure. The wOOx™ bass
drivers are composed of a unique dual suspension
design mounted in front of the subwoofer resulting
in a deeper, richer bass performance you would
expect from a large subwoofer. With the
symmetrical construction of the wOOx™ Bass
Radiator, there is complete balance of the
membrane movement producing no discernable
distortion. As a result, gaming effects are more
intense and music more enjoyable.
This Soft Flat Panel speaker system is especially
designed as a multimedia hifi multi-channel
speaker system. It will enhance dramatically your
gaming and audio-visual experience. It delivers the
ultimate sound solution for gamers by providing
thrilling surround sound.
All together, there can be connected up to three
audio-visual sources at the same time directly to
the speaker system: one 4-channel input (INPUT 1)
for your 4-channel soundcard and two stereo inputs
for other audio-visual devices (INPUT 2, INPUT 3).
Soft Flat Panel Satellite Speakers
For optimum performance, the set is best used with
3D positional audio inputs, from e.g. 4-channel
soundcards. The soundcard outputs for 3D
positional audio outputs are usually marked as
OUT 1 and OUT 2. The information provided from
these OUT 1 and OUT 2 computer outputs will
activate the four satellites and the subwoofer so
that you will experience sound from all around you.
NXT* has developed a unique loudspeaker
technology that has redefined the shape of sound.
Philips has taken a new step in optimising the
implementation of NXT*’s technology by adding a
High Frequency Booster. The High Frequency
Booster boosts sound pressure at the higher
frequencies, thereby enabling the use of a soft
panel material whose sound quality matches the
performance of most home audio systems.
If your computer is only equipped with a stereo
soundcard, or you’re using other stereo audio-
visual sources as input, then the speaker system
will operate as a stereo speaker system. The front
and surround satellites on one side will be one
stereo channel and the front and surround satellites
on the other side will be the other stereo channel.
* NXT Trade Mark of New Transducers Ltd.
Trade Mark of New Transducers Ltd.
All Patent Rights Reserved.
Next to your computer, this multi-functional A3.500
Acoustic Surround Power / MMS 305 system
can be connected to your CD/MP3 player and
games consoles as well. It is also possible to drive
the speaker system from a DVD player that has
two analog outputs.
Ultra thin, stylish design, superb acoustic quality
and high impact bass power from all around you.
Flat will –from now onwards - never sound flat
anymore, at least Philips soft flat panel speakers!
6
Explanation (Illustration page 3)
1
STANDBY
12 INPUT 1 SURR (BLACK COLOR)
To connect the Surround In cable - for the
surround satellite speakers - from Out 2 at
the soundcard/ sound source
To switch the speaker system into ON or OFF
(=STANDBY) mode
2
MUTE
To switch the speaker system into mute 13 INPUT 2 STEREO
mode, and normal mode again
Option to connect a stereo soundcard or an-
other stereo audio-visual sound source
3
4
MASTER VOLUME - / +
To adjust the master volume higher or lower 14 INPUT 3 STEREO
Option to connect a stereo soundcard or an-
FADE REAR / FRONT
To adjust the loudness of the rear and the
front satellite speakers
other stereo audio-visual sound source
15 SATELLITE FR.L
To connect the front left satellite speaker
5
6
7
BASS - / +
To adjust the bass level according your per- 16 SATELLITE FR.R
sonal preference
To connect the front right satellite speaker
TREBLE - / +
To adjust the presence of the higher tones
according your personal preference
17 SATELLITE SR.L
To connect the surround left satellite speaker
18 SATELLITE SR.R
To connect the surround right satellite
speaker
wOOx™
To activate wOOx™, hear a full spectrum of
bass frequencies – ranging from the subtle
to the extreme
19 REMOTE IR-EYE
To connect the remote control IR-EYE
8
9
GAME/ SPEECH/ MUSIC
Choose from either the game, speech or
music button for optimal pre-set sound re-
production per genre
WALL MOUNTING OPTION
The design of the satellites speakers offers
wall mounting as an option
INPUT 1/ INPUT 2/ INPUT 3
Make your choice of audio-visual source se-
lection. Two separate stereo input sources
and one 4-channel input source can be con-
nected to this multi-channel speaker system
10 POWER
This mains power cord must be connected
to the AC outlet
11 INPUT 1 LINE (GREEN COLOR)
To connect the Line In cable - for the front
satellite speakers - from Out 1 at the
soundcard/ sound source
7
Installation (Illustration page 3)
1. Connect the LINE IN cable (green color) from
Safety
OUT 1 at the soundcard to INPUT 1 LINE , AND
•
Do not expose the speakers to excessive heat
(caused by heating equipment or direct
sunlight). To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. If fluid spills into the speakers,
disconnect any connections immediately and
let the speakers dry before reusing them.
2. Connect the SURROUND IN cable (black color)
from OUT 2 at the soundcard to INPUT 1 SURR
(only applicable if a 4-channel soundcard is
available), AND/OR
3. Connect another LINE IN cable from another
stereo audio-visual source to INPUT 2 STEREO,
AND/OR
•
•
You may clean the speakers with a soft, slightly
dampened lint-free cloth. Do not use any
cleaning agents as they may have a corrosive
effect.
4. Connect another LINE IN cable from another
stereo audio-visual source to INPUT 3 STEREO
5. Connect the front left satellite speaker to
If the speakers do not operate, disconnect them
from the power supply. Wait a few seconds
before reconnecting them to the power supply.
SATELLITE FR.L
6. Connect the front right satellite speaker to
SATELLITE FR.R
7. Connect the surround left satellite speaker
to SATELLITE SR.L
8. Connect the surround right satellite speaker
to SATELLITE SR.R
9. Connect the Remote Control IR-EYE connector
to the REMOTE IR-EYE and place the eye on top
of your monitor/ desktop PC
10. Connect the fixed mains power cord to the
AC outlet
11. Switch on (and switch off as well) the system
using the STANDBY button on the remote
control
12. Tune the system using the controls on the
soundcard/ sound source and the controls
on the remote control
NOTE: Do not insert the power plug into the AC
outlet until all connections are made!
8
Specifications
Overall
•
•
•
•
•
output power
THD
frequency response : 40 – 20,000 Hz
cross-over frequency : 200 Hz
magnetically compensated
: 80 watts RMS
: 10% @ 80 watts RMS
Pre-amplifier
•
•
•
•
•
•
•
input resistance
input impedance
clipping level
distortion
digital volume
bass
treble
: 100K ohms
: >10K ohms
: 2V RMS
: 0.05%
: 50 steps @ 1.25dB per step
: 8± 2dB per step
: 8± 2dB per step
Satellites
•
•
drivers
:
:
:
:
8 ohms Soft Flat 3.25”x5.0”
4 x 10 watts RMS @ 10% THD
4 x 8 watts RMS @ 0.5% THD
4 x 1 watts RMS @ 0.05% THD
output power
•
frequency response : 200 – 20,000 Hz
Subwoofer
•
•
drivers
:
:
:
:
5.25” super woofer + 6” wOOx
2 x 20 watts RMS @ 10% THD
2 x 15 watts RMS @ 0.5% THD
2 x 1 watts RMS @ 0.05% THD
output power
•
frequency response : 40 – 200 Hz
Remote Control
# of functions
•
: 17 key buttons
Dimensions
•
•
•
•
satellites
:
:
158 (H) x 82 (W) x 81 (D) mm
228 (H) x 190 (W) x 266 (D) mm
subwoofer
remote control
packaging
: 168 (L) x 38 (W) x 17 (D) mm
: 284 (H) x 232 (W) x 384 (D) mm
Weight
satellites
subwoofer
•
•
: 4 x 0.23 kg
: 3.7 kg
System Requirements
•
•
preferred
: 4-channel soundcard
: stereo soundcard, MP3/ CD/
Cassette player, game
consoles
other possibilities
9
PHILIPS CONSUMER ELECTRONICS COMPANY
A Division of Philips Electronics North America Corporation
Knoxville, Tennessee 37914-1810, U.S.A.
Printed in Malaysia
4399 294 47613
62
|